Cookie Img
Send Inquiry    Call Me Free
Home » Products » Off Grid Inverter » Off Grid Solar Power Inverter

Off Grid Solar Power Inverter

Off Grid Solar Power Inverter
Product Code : SDP-50KW
Brand Name : SANDI
Price And Quantity
  • Minimum Order Quantity
  • 1
  • Unit of Measure
  • Piece/Pieces
  • Price Range
  • 7000 - 9000 USD ($)
Product Specifications
  • Output
  • 3 phase 380-440Vac
  • Frequency
  • 50/60 Hertz (HZ)
  • Current
  • 75.75A Ampere (amp)
  • Display
  • LCD
  • Sensor Type
  • current/voltage sensors
  • Measuring Range
  • 240-600VDC
  • Product Type
  • DC to AC inverter
  • Operating Temperature
  • -25~+55 Celsius (oC)
  • Working Temperature
  • -30~+55 Celsius (oC)
  • Input
  • 360VDC or 384VDC
  • Pressure Type
  • DC to AC
  • Diameter
  • 750 Millimeter (mm)
  • Application
  • solar system
  • Supply Voltage
  • 3 phase 380-440Vac Volt/Ohm (v/ohm)
  • Accuracy
  • 1 %
  • Dimension(L*W*H)
  • 700*750*1300 Millimeter (mm)
  • Weight
  • 400 Kilograms (kg)
  • Warranty
  • 3 years
Product Description

Off Grid Solar Power Inverter

Feature:

  • Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, with high efficiency and balanced performance. It comes with powerful protection functioning that can protect from short circuits, overloading as well as over temperature which makes it more safer and reliable and have service life of more than 15-20 years. 
  • Intelligence, honest structure design and require cheap maintenance. 
  • Two ways to start it, one is Step Down Voltage Start and second is Variable Frequency Start.
  • LCD panel can be conveniently set the output frequency by the client
  • As per the rated voltage its output voltage can be set from -40 % to +20 %, with less than 1% of voltage output has high accuracy. 
  • Range of DC input voltage range is adjustable. Through its LCD panel over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point can be set. Quantity of  photovoltaic modules can be adjust when it is necessary required in future.
  • Fresh since wave output, with good passing less than response of 50 MS, stable output voltage, small harmonic distortion and higher conversion efficiency. 
  • Less frequency transformer, that ensures high efficiency inverter >94% without the loss of load.
  • Fault instruction function that can exhibit strong data. The DC input voltage os shown by the LCD. 
  • AC bypass input voltage, time and date, phase voltage, frequency, output power KWH and phase current.  
  • Displays fault code, temperature
  • These huge input voltage can be adjust as per the client's requirement and can be applicable even without the use of battery.
  • Huge input voltage can be adjust as per the client's requirements. It has stability to run without use battery. Our client can choose there range of voltage like 100-500 V to 200-850 V respectively.
  • Conversion efficiency is very high.
  • AC bypass can be added to input: Battery Power Priority or AC Battery Priority Optional.
  • The product is certified from Europe by CE (EMC and LVD) and is approved by CEC, ERAC energy network in Australia.
Optional:

RS485 remote monitoring;
Can add AC bypass complementary function;

Specification:

Model

SDP-40KW

Isolation mode

Low Frequency Transformer

DC Input

Rated voltage (Vdc)

360V

Rated current

111A

AC Output

Rated output power

40KW

Output waveform

Pure Sine Wave

Rated Voltage

220V±3%

380VAC±3%

Phases

Single phase

3 phase 4 wire

Rated current

182A

61A (phase current)

Frequency

50Hz or 60Hz

Rated output voltage range (V)

220/230/240/380/400/415VAC optional

Power Factor

0.9

Overload Ability

150%, 5 seconds

Efficiency

>93%

Waveform distortion rate (THD)

<3% Linear load

Dynamic Response (0 to 100% load)

5% 50ms

Display

LCD

Running mode

Working continuously

Electrical insulation properties

2000Vac, 1 Minute

Protection Function

Protection

Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.

Cooling method

Fan-cooled

Short-circuit protection

No automatic recovery, need to restart the machine

Working environment

Noise ( 1 meter)

50dB

Degree of protection

IP20 indoor

Working Altitudeï¼Ë†mï¼

2000

Working temperature

-25~+55

relative humidity

0~90% non-condensing

Mechanical dimension

Depth x Width x Height

650 x 750 x 1100mm

Weight

350Kg

 

Trade Information
  • FOB Port
  • Ningbo/Shanghai
  • Payment Terms
  • Paypal, Western Union, Telegraphic Transfer (T/T), Letter of Credit at Sight (Sight L/C)
  • Supply Ability
  • 6000pcs Per Year
  • Delivery Time
  • 12 Days
  • Sample Available
  • Yes
  • Sample Policy
  • Contact us for information regarding our sample policy
  • Packaging Details
  • Packing of Off Grid Solar Power Inverter is standard export honeycomb carton with pallet or wooden box.
  • Main Export Market(s)
  • Africa, Middle East, Western Europe, Eastern Europe, South America, North America, Central America, Australia, Asia
  • Main Domestic Market
  • All India
  • Certifications
  • CE(EMC&LVD), SAA(AS4777&AS3100), VDE ARN 4105, UL1741&CSA22.2, G83, G59, ISO9001

YUEQING SANDI ELECTRIC CO.,LTD

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



Contact Details
YUEQING SANDI ELECTRIC CO.,LTD All Rights Reserved.