Features:
Technical Specification:
| Model | SDP-40KW | ||
| Isolation mode | Low Frequency Transformer | ||
| DC Input | Rated voltage (Vdc) | 360V | |
| Rated current | 111A | ||
| AC Output | Rated output power | 40KW | |
| Output waveform | Pure Sine Wave | ||
| Rated Voltage | 220V 3% | 380VAC 3% | |
| Phases | Single phase | 3 phase 4 wire | |
| Rated current | 182A | 61A (phase current) | |
| Frequency | 50Hz or 60Hz | ||
| Rated output voltage range (V) | 220/230/240/380/400/415VAC optional | ||
| Power Factor | 0.95 | ||
| Overload Ability | 150%, 5 seconds | ||
| Efficiency | >94% | ||
| Waveform distortion rate (THD) | <3% Linear load | ||
| Dynamic Response (0 to 100% load) | 5% 50ms | ||
| Display | LCD | ||
| Running mode | Working continuously | ||
| Electrical insulation properties | 2000Vac, 1 Minute | ||
| Protection Function | Protection | Input reverse polarity, under voltage, over voltage, output over-current, short circuit, overheating etc. | |
| Cooling method | Fan-cooled | ||
| Short-circuit protection | No automatic recovery, need to restart the machine | ||
| Working environment | Noise ( 1 meter) | 50dB | |
| Degree of protection | IP20 indoor | ||
| Working Altitude | 2000 | ||
| Working temperature | -25~+55 | ||
| relative humidity | 0~90% non-condensing | ||
| Mechanical dimension | Depth x Width x Height | 650 x 750 x 1100mm | |
| Weight | 350Kg | ||