Cookie Img
Send Inquiry    Call Me Free
Home » Products » Very Low Frequency High Voltage Test Instrument » 80kv High Voltage Test Instrument

80kv High Voltage Test Instrument

80kv High Voltage Test Instrument
Product Code : SVLF-80KV
Brand Name : SANDI
Product Description

The third generation SVLF series Ultra-Low-Frequency AC High Voltage Tester

Description
Sandi VLF stands for Very Low Frequency. A Sandi VLF is an AC output high voltage instrument.
Sandi VLF products provide sinusoidal AC voltage but at 0.1Hz - 0.02 Hz, compared to the 50/60Hz output of conventional AC test sets. It is still an AC voltage with sinusoidal polarity reversals every half cycle. The Sandi VLF instrument is used to provide a simple go/no-go, or pass/fail withstand test. Also, Sandi VLF instruments can be used as the voltage source for performing off-line Partial Discharge testing.

Application
Sandi VLF testing is used for any application requiring AC testing of high capacitance loads. The major application is for testing solid dielectric cable, followed by testing large rotating machinery, and occasionally for testing large insulators, arrestors, and the like. Even if a utility doesn't adopt Sandi VLF for widespread cable testing, one of the best reasons to use VLF is to check installation quality and accessories, like splices. Many failures are due to damage during installation, improper workmanship, and/or insulation damage caused by excessive voltage fault locating - thumping. At the very least, every newly installed or repaired cable should be Sandi VLF tested before re-energizing.

Benefits of Sandi VLF

  • Portable and affordable.
  • All models feature is true sine wave output.
  • Wave form is independent of load capacitance between 0.01mF and maximum load.
  • Highest load ratings available.
  • Highest voltage models available.
  • Simple and easy operation.
  • AC testing does not degrade good cable insulation.
  • Harmful space charges are not injected into the cable insulation.
  • No traveling waves are generated during testing.
  • Rugged and reliable design less prone to failure from transients.
  • No polarization effects as with DC.
  • Breakdown detection.
  • Reporting
  • Display: The 7 'capacitive touch screen, the screen displays real-time measurement data and the output waveform.
  • Comprehensive protection: high, low pressure side of the over voltage and over-current protection, rapid response action (action time 10ms).
  • Small size, light weight: very conducive to outdoor work.
  • Communication interface: USB2.0.


Supplied Accessories

  • A dedicated high voltage-voltage connecting cable;
  • A dedicated low-voltage connecting cable;
  • A power line;
  • Ten power fuse;
  • A discharge stick;
  • An instruction manual.

Technical Specification:



Model

Output Peak voltage

Measuring range

Weight

Applications

SVLF-30

30KV

0.1Hz, <1.1

Controller: 4 kg

Booster: 25 kg

10KV and below voltage cables,generator

0.05Hz <2.2

0.02Hz <5.5

SVLF-40

40KV

0.1Hz <1.1

Controller: 4 kg

Booster: 45 kg

13.8KV and below voltage cables,generator

0.05Hz <2.2

0.02H <5.5

SVLF-50

50KV

0.1H <1.1

Controller: 4 kg

Booster: 45 kg

15KV and below voltage cables, generator

0.05Hz <2.2

0.02Hz <5.5

SVLF-60

60KV

0.1Hz <1.1

Controller: 4 kg

First Booster:25 kg

Second Booster:45 kg

20KV and below voltage cables, generator

0.05Hz <2.2

0.02Hz <5.5

SVLF- 80

80KV

0.1Hz <1.1

Controller: 4 kg

First Booster:25 kg

Second Booster:45 kg

35KV and below voltage cables, generator

0.05Hz <2.2

0.02Hz <5.5




YUEQING SANDI ELECTRIC CO.,LTD

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



Contact Details
YUEQING SANDI ELECTRIC CO.,LTD All Rights Reserved.