Three Phase Sine Wave Inverter Charger

Product Code : SDP-20KW

Brand Name : SANDI

Product Description

Parameters:

Model		SDP-20KW
Isolation mode		Low Frequency Transformer
DC Input	Input rated voltage (Vdc)	192V		240V
	Input rated current(A)	104A		83A
AC Output	Rated output power	20KW
	Output waveform	Pure sine wave
	Phases	Single phase 2 wire + ground	2 phase 3 wire + ground		3 phase 4 wire + ground
	Output rated voltage	220VAC ±3%	120/240VAC ±3%		380VAC ±3%
	Output Frequency	50Hz or 60Hz±0.05Hz
	Rated Output Voltage (V)	120/220/230/240/380/400/415VAC optional
	Power Factor(PF)	0.9
	Overload Ability	150%, 10s
	Efficiency	≥94%
	Waveform distortion rate (THD)	<3%(Linear load)
	Dynamic Response (0 to 100% load)	5%,≤30ms
	Display	LCD
	Running mode	Working continuously
	Electrical insulation properties	2000Vac, 1 Minute
Protection function	Protection	Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.
	Cooling method	Fan-cooled
	Short-circuit protection	No automatic recovery, need to restart the machine
working environment	Ambient temperature	-15~+55℃
	Using environment humidity	0~90%,No condensation
	Noise ( 1 meter)	≤50dB
	Degree of protection	IP20(indoor)
	Using altitude(m)	≤2000
CE Standard	EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005, EN61000-3-12:2005, EN61000-3-11:2000