10KW 3 Phase to 3 Phase Converter
Our SDT series Power Phase converter is one of the most advanced AC to AC conversion products in the world which can convert ordinary single-phase power to industrial three-phase power.
The converter can supply AC power to all kinds of electric equipment, electric motors, pump, compressor, and other industrial power supply. Applicable to all types of load.
Features:
Technical Data
Model | SDT-10KW | |
Isolation | Low Frequency Transformer | |
AC Input | Input rated voltage(VAC) | 3 phase 380V/60Hz(L1,L2,L3-N 220V. L1-L2-L3 380V) |
Input rated current(A) | 15.15A(phase current) | |
Input Frequency | 60Hz+0.05Hz | |
AC Output | Rated AC output power | 10KW |
AC output waveform | Pure sine wave | |
Phases | Three phase 4 wires + ground | |
Output rated voltage | 380VAC +3%(L1,L2,L3 - N 220V. L1-L2-L3 380V) | |
Output Frequency | 50Hz+0.05Hz | |
Output rated current(A) | 15.15A (phase current) | |
Power Factor(PF) | >0.95 | |
Overload Ability | 150%, 10s | |
Efficiency | >94% | |
Waveform distortion rate (THD) | <3%(Linear load) | |
Crest Factor (CF) | 3:1 | |
Display | LCD | |
Electrical insulation properties | 2500Vac, 1 Minute | |
Ambient temperature | -15~+55 | |
Using environment humidity | 0~90%,No condensation | |
Protection | Input under voltage, overvoltage, output over-current, short circuit, overheating etc. | |
Structure | Cooling method | Fan-cooled |
Noise | <40dB | |
Degree of protection | IP20(indoor) | |
Using altitude(m) | 3000 | |
Dimensions (mm) | 700x600x1100mm | |
Weight (Kg) | 250Kg | |
CE Standard | EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005, EN61000-3-12:2005, EN61000-3-11:2000 |