Parameters:
| Model | SDP-12KW | ||||||
| Isolation mode | Low Frequency Transformer | ||||||
| DC Input | Rated voltage (Vdc) | 48V | 96V | 192V | 240V | ||
| Rated current(A) | 250A | 125A | 62.5A | 50A | |||
| AC Output | Rated output power | 12KW | |||||
| Output waveform | Pure Sine Wave | ||||||
| Rated Voltage | 220V 3% | 110/220VAC 3% | 380VAC 3% | ||||
| Phases | Single phase | 2 phase 3 wire | 3 phase 4 wire | ||||
| Rated current (A) | 54.5A | 54.5A (phase current) | 18A (phase current) | ||||
| Frequency | 50Hz or 60Hz | ||||||
| Rated output voltage | 110/120/220/230/240/380/400/415/440VAC optional | ||||||
| Phases | Single / Two/ Three phase optional | ||||||
| Power Factor (PF) | >0.95 | ||||||
| Overload Ability | 150%, 5 seconds | ||||||
| Efficiency | >94% | ||||||
| Waveform distortion | <3%(Linear load) | ||||||
| Dynamic Response | 5%, 50ms | ||||||
| Display | LCD | ||||||
| Running mode | Working continuously | ||||||
| Electrical insulation | 2000Vac, 1 Minute | ||||||
| Protection Function | Protection | Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc. | |||||
| Cooling method | Fan-cooled | ||||||
| Short-circuit protection | No automatic recovery, need to restart the machine | ||||||
| Working environment | Noise ( 1 meter) | 50dB | |||||
| Degree of protection | IP20(indoor) | ||||||
| Working Altitude (m) | 2000 | ||||||
| Working temperature | -25 +55 | ||||||
| relative humidity | 0 90%,non-condensing | ||||||
| Mechanical dimension | Depthx Width x Height | 500x600x800mm | |||||
| Weight (Kg) | 140Kg | ||||||
| Certification | European CE(EMC & LVD), SAA | ||||||