Features:
Specifications of Pure Sine Wave Inverter:
| Model | SDP 2000W | SDP 3000W | |||
| Isolation | Low Frequency Transformer | ||||
| DC Input | Input rated voltage VDC | 24V | 48V | 48V | 96V |
| Input rated current A | 83A | 41A | 62.5A | 31A | |
| AC Output | Rated AC output power | 2000W | 3000W | ||
| AC output waveform | Pure sine wave | ||||
| Phases | Single phase 2 wire and ground | ||||
| Output rated voltage | 220VAC 3% | ||||
| Output Frequency | 50Hz/60Hz 0.05Hz | ||||
| Output rated current A | 9A | 13.6A | |||
| Structure | Charging function | Charger outside/inside (optional) | |||
| Power Factor PF | 0.8 | ||||
| Overload Ability | 150%, 10s | ||||
| Inverter efficiency (80% resistive load) | 90% | ||||
| Total voltage waveform distortion rate | <3%Linear load | ||||
| Crest Factor (CF) | 3:1 | ||||
| Display | LCD | ||||
| Electrical insulation properties | 1500Vac, 1 Minute | ||||
| Ambient temperature | -15 55 | ||||
| Using environment humidity | 0 90%No condensation | ||||
| Protection | Input under voltage, over voltage, over temperature, over-current, short circuit, etc. | ||||
| Cooling method | Fan-cooled | ||||
| Noise | <40db | ||||
| Degree of protection | IP20 indoor | ||||
| Using altitude m | 2000 | ||||
| CE Standard | EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005, EN61000-3-12:2005, EN61000-3-11:2000 | ||||