Technical Specifications:
| Model | SDP-60KW | |
| Isolation mode | Low Frequency Transformer | |
| DC Input | Rated voltage (Vdc) | 360V |
| Rated currentA | 166.7A | |
| AC Output | Rated output power | 60KW |
| Output waveform | Pure Sine Wave | |
| Rated Voltage | 380VAC3% | |
| Phases | 3 phase 4 wire | |
| Rated currentA | 90.9A (phase current) | |
| Frequency | 50Hz or 60Hz | |
| Rated output voltage range (V) | 380/400/415/440VAC optional | |
| Power FactorPF | 0.9 | |
| Overload Ability | 150%, 5 seconds | |
| Efficiency | >93% | |
| Waveform distortion rate (THD) | <3%Linear load | |
| Dynamic Response (0 to 100% load) | 5%50ms | |
| Display | LCD | |
| Running mode | Working continuously | |
| Electrical insulation properties | 2000Vac, 1 Minute | |
| Protection Function | Protection | Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc. |
| Cooling method | Fan-cooled | |
| Short-circuit protection | No automatic recovery, need to restart the machine | |
| Working environment | Noise ( 1 meter) | 50dB |
| Degree of protection | IP20indoor | |
| Working Altitudem | 2000 | |
| Working temperature | -25~+55 | |
| relative humidity | 0~90%non-condensing | |
| Mechanical dimension | Depth x Width x Height | 800x850x1200mm |
| Weight Kg | 450Kg | |